Xerox WorkCentre PE120-120i-4396 - Manual (Page 65)

Xerox WorkCentre PE120i System Administration Guide Page 5-9
Ap
ple
T
alk Test Print
To ensure the WorkCentre PE120i has been installed on the network correctly a test print
should be submitted from a client workstation. Perform the following steps:
¾ Open a document on a client workstation.
¾ Select the WorkCentre PE120i as the printer for sending documents to.
¾ Print the document on the device and verify that it prints correctly.
¾ Ensure the print driver is installed on every workstation that will be sending jobs to the
device.
¾ Repeat the test for all workstations that will be sending jobs to the device.
1
2
3
4
5