Xerox WorkCentre PE120-120i-4396 - Manual (Page 52)

Page 4-10 Xerox WorkCentre PE120i System Administration Guide
Pr
in
t Dr
iv
e r I
n s tall
a ti on
for
Ne
twor
k e
d P
rint
e rs Windows 98/Me
¾ Refer to the Xerox CentreWare documentation to install and setup the WorkCentre PE120i
Windows drivers on the workstation. Once the drivers are installed, connect a driver to the
WorkCentre PE120i on the network.
¾ Continue with Test Print on page 4-14.
For directions and drivers please go to “ www.office.xerox.com ” and in the search textbox enter
"PE120i". In the search results you will see the "WorkCentre PE120i" listed, beneath that click
the "Download Drivers" link. You will arrive at the Download Drivers Web page. Under
"Operating System" choose the Windows 98 and then choose your Language and click "Go".
The Pe120i drivers are then listed. You must choose to download the Xerox TCP/IP Port
Monitor and then either the PCL6 print driver or the PostScript print driver. Install the
Xerox TCP/IP Port Monitor first on each workstation then install the print driver. After
installation perform a test print.
1
2