Xerox WorkCentre PE120-120i-4396 - Manual (Page 50)

Page 4-8 Xerox WorkCentre PE120i System Administration Guide
Pr
in
t Dr
iv
e r I
n s tall
a ti on
for
Ne
twor
k e
d P
rint
e rs Windows NT V4.0 (TCP/IP)
NOTE: TCP/IP Print Services must be installed and running on the workstation.
Use the Add Printer Wizard to add the WorkCentre PE120i to the network.
¾ At the Windows NT workstation, select [Start], select [Settings], and then select [Control
Panel].
Double-click on the [Network] icon and then select [Services].
Ensure that Microsoft TCP/IP Print Service is running and select [Start], select [Settings],
and then select [Printers].
Double-click on the [Add Printer] icon to display the Add Printer Wizard.
¾ Select [My Computer] and then select [Next] to display the dialog box listing available
ports.
Select [Add Port] to display the Printer Ports dialog box.
Select [LPR Port] and select [New Port] to display the Add LPR compatible printer dialog
box.
¾ Enter the IP Address of the printer in the [Name or address of server providing lpd]
field.
Enter [lp] (in lower case) in the [Name of printer or print queue on that server] field.
NOTE: lp must be entered regardless of the name of the printer or print queue. lp is
the name of the remote printer/server on the WorkCentre PE120i. This name does
not change.
Select [OK].
Select [Close].
¾ With the New Port selected, select [Next].
Insert the CD ROM with the WorkCentre PE120i drivers into the workstation and select
[Have Disk].
Browse to the required Windows NT driver on the CD ROM and select [OK].
1
2
3
4