Xerox WorkCentre PE120-120i-4396 - Manual (Page 40)

Page 3-6 Xerox WorkCentre PE120i System Administration Guide
NetW
are
¾ Continue with NetWare Setup on page 3-7.
3
¾ Press or until Configure
Network is displayed and press
[Enter].
8. Network Setup
[Config Network]
4
¾ Press or until Netware
is displayed and press [Enter].
Config Network
[Netware]
5
¾ Press or until the
appropriate frametype is
displayed and press [Enter].
The choices are:
Auto
Enable 802.3
Enable II
Enable 802.2
Enable SNAP
Off
Netware
[Auto]
6