Xerox WorkCentre PE120-120i-4396 - Manual (Page 25)

Xerox WorkCentre PE120i System Administration Guide Page 2-1
2 Basic Network Installation
Introduction
This chapter explains how to make the basic settings to install the WorkCentre PE120i on a
network. The physical connection is Ethernet and the addressing protocols are provided by TCP/
IP. The following information is provided:
¾ Information Checklist . . . . . . . . . . . . . . . . . . . . . . . 2-2
¾ Basic TCP/IP Settings . . . . . . . . . . . . . . . . . . . . . . 2-3