Xerox WorkCentre PE120-120i-4396 - Manual (Page 119)

Xerox WorkCentre PE120i System Administration Guide Page 9-7
Adm
in
is
tr a ti on T
o
ols Defining the Printer
Use these instructions to change the printer’s name and location.
To define the printer, perform these steps:
¾ Enable CentreWare Internet Services (see “Enabling Internet Services” on page 9-4).
¾ At the CentreWare Internet Services Home Page for the WorkCentre PE120i, select the
[Properties] tab.
¾ Enter the [Machine Name], but only if necessary.
¾ Enter the [Machine Location], if required.
¾ Click the [Apply] button to implement any changes.
NOTE: Click the [Undo] button to cancel any changes made and return to the
previous values.
¾ Select the [Status] tab and then select [Reset Network Controller] to enable the
selection to take effect.
1
2
3
4
5
6