Konica Minolta Bizhub 215 User Manual
Page 69
bizhub 215
5-3
5.1
Transmitting an Internet fax
5
6
Press the Start key.
% This starts scanning and sending if the original has been loaded onto the ADF.
After sending is completed, a "long beep" sounds.
% To stop sending, press the Clear/Stop key, and select [YES] in the displayed screen.
% If you load the original on the Original Glass, go to step 7.
7
Use +, to select [AUTO DETECTION] or [MANUAL], and press the OK key.
8
To start scanning, press the OK key.
% When changing the scanning paper size, press , to respecify the size.
9
When continuously scanning the original, load the next original, and press the OK key.
% Repeat this procedure until scanning of originals is completed.
10
When scanning of all originals has been completed, press the Start key.
Sending starts.
% The Internet fax communication supports the following functions in the same way as for a fax com-
munication using a telephone line.
Sequential broadcast transmission (p. 3-13)
Specified-time transmission (p. 3-23)
Relay broadcasting (p. 4-11)
Forward (p. 4-12)
After sending is completed, a "long beep" sounds.
% To stop sending, press the Clear/Stop key, and select [YES] in the displayed screen.
d
Reference
To cancel sending the scanned document, refer to page 3-18.
If a transmission fails, a transmission result report is printed out. For details, refer to page 3-19.
5.1.3
Using the Address Book for search (Address Search)
An E-mail address can be searched from the Address Book. Address Search is a function that recalls an E-
mail address registered in the LDAP server. To search for a target E-mail address, enter a part of its character
string or a destination name.
d
Reference
To use Address Search, configure LDAP settings in advance. For details, refer to the [User's Guide Network
Administrator].
This example shows how to recall an E-mail address registered in [Destination name: AAA TOKYO, E-mail
address: [email protected]].
1
Load the original.
2
When necessary, specify a desired option for [QUALITY].
% For details on [QUALITY], refer to page 5-7.
3
Press AddressBook.
4
Use +, to select [LDAP SEARCH], and press the OK key.