Konica Minolta Bizhub 215 - Manual (Page 40)

bizhub 215 3-14
3.4 Specifying a destination 3
3
Use +, to select [BROADCAST], and press the OK key.
4
Specify a destination, and press the OK key.
% When using a One-Touch Dial Key: Press the One-Touch Dial Key of a destination.
% When using Speed Dial: Press the Speed Dial key, and enter a 3-digit speed dial number of a des-
tination.
% When using Group Dial: Press the One-Touch Dial Key assigned to a destination group.
% When using Address Book: Press AddressBook to select [LIST] or [SEARCH], and specify a desti-
nation. For details, refer to page 3-12.
% When entering a fax number: Enter a destination fax number.
% If an optional Image Controller IC-209 or Network Card NC-504 is installed on this machine, Ad-
dress Search is available. For details, refer to page 5-3.
5
To add the destination, select [ADD], then press OK.
% Repeat Steps 4 and 5 to specify all destinations.
6
When necessary, specify a desired option for [QUALITY].
% For details on [QUALITY], refer to page 3-6.
7
Press the Start key.
This starts scanning and sending.
Tips
- A result report is printed out after sending is completed; therefore, you can check whether a fax is sent
to all destinations.
- To stop sending, press the Clear/Stop key, and select [YES] in the displayed screen. This cancels all
the selected destinations.
- To cancel the specified-time transmission, press the Function key, and select [CANCEL RESERV.] to
cancel the reservation. For details, refer to page 3-18.
3.4.10 Manual redialing
Redialing means dialing the last fax destination once more.
Tips
- Manual redialing is not available for group dialing.
1
Load the original.
% For details on how to load the original, refer to page 3-4.
2
When necessary, specify a desired option for [QUALITY].
% For details on [QUALITY], refer to page 3-6.
3
Press the Redial/Pause key.
This displays a fax number of the destination that sent the last fax.
4
Press the Start key.
This starts scanning and sending.