Konica Minolta Bizhub 215 User Manual
Page 102
bizhub 215
7-3
7.1
Utility settings
7
In addition to No.1 to No.5, the following items can be configured if FAX Kit FK-510 is installed on this ma-
chine. Press the Utility key, and configure the following settings as necessary.
Settings
Contents
Reference
page
[MACHINE
SETTING]
[BUZZER
VOLUME]
[DISABLE/
ENABLE]
Specify whether to
sound the machine
status notification
buzzer.
−
[CONFIRMATION]
Specify the volume of
the operation confir-
mation sound such
as the input confir-
mation sound, invalid
input sound, or basic
sound.
−
[COMPLETE]
Specify the volume of
the successful com-
pletion sound such
as the print operation
completion sound or
fax communication
completion sound.
−
[PREPARATION]
Specify the volume of
the completed prep-
aration sound.
−
[CAUTION]
Specify the volume of
the caution sound
such as the simple
caution sound levels
1 to 3, or a severe
caution sound.
−
[INITIAL MODE]
Select the initial
mode. Select [COPY]
or [FAX].
−
[ADMIN.
MANAGEMENT]
[REMOTE MONITOR]
Configure the set-
tings to remotely ac-
cess this machine.
−
[E-MAIL
SETTING 1]
[E-MAIL MODE]
Specify the maximum
transmission size,
maximum transmis-
sion resolution, and
compression coding
method when trans-
mitting an Internet
fax.
Select [ADVANCED]
in the [E-MAIL
MODE] screen, and
configure each set-
ting.
Each set-
ting can be
configured
when
transmit-
ting an In-
ternet fax.
(p. 5-5)
[E-MAIL
SETTING 2]
[AUTO
RECEPTION]
Configure the setting
to automatically re-
ceive an Internet fax.
[REPLY ADDRESS]
Specify an address to
send a receiving re-
sult report to when a
receiving error oc-
curs.
[HEADER PRINT]
Configure the setting
to send a fax with a
header.