Konica Minolta Bizhub 215 - Manual (Page 58)

bizhub 215 4-4
4.2 Using a Confidential User Box for sending and receiving (Confidential communication) 4
4.2 Using a Confidential User Box for sending and receiving (Confi-
dential communication)
The confidential communication is a function used to transfer an original between you and specific persons
using the Confidential User Box. This function requires a User Box ID, enabling you to safely transfer a con-
fidential document by fax.
Sending an original to a Confidential User Box of the recipient machine is referred to as confidential trans-
mission, and receiving an original in a Confidential User Box of your machine is referred to as confidential
reception.
d
Reference
This machine supports up to five Confidential User Boxes. For details, refer to page 7-16.
If an F code of a destination is registered in one-touch dial or speed dial in advance, an F-code communica-
tion can be sent to a destination. For details, refer to page 4-2.
This section explains how to register a Confidential User Box, use a confidential transmission, and print out
a received original in a Confidential User Box.
4.2.1 Registering a Confidential User Box
To use the confidential reception, you must register a Confidential User Box in advance. For details on the
registration procedure, refer to page 7-16.
4.2.2 Sending data to a Confidential User Box (Confidential transmission)
The confidential transmission is a function used to send data to a Confidential User Box of a destination.
It is available when sending an important document to a specific person.
Tips
- The confidential transmission function supports F-code communication. A machine compatible with an
F code can be selected as a destination of confidential transmission.
- To use this function, specify a destination and configure a Confidential User Box setting.
- To check a fax document in the destination side, enter a User Box ID.
1
Load the original.
% For details on how to load the original, refer to page 3-4.
2
When necessary, specify a desired option for [QUALITY].
For details on [QUALITY], refer to page 3-6.
3
Press the Function key.
4
Use +, to select [MAILBOX TX], and press the OK key.