Konica Minolta Bizhub 215 - Manual (Page 57)

bizhub 215 4-3
4.1 Transmission with F-Code (F-Code TX) 4
4.1.2 Specifying an F code to register a destination
When registering one-touch dial or speed dial, specify an F code.
1
Enter a destination fax number using the Keypad.
2
Press ,.
3
Use +, to select [SUB, SID SETTING], and press the OK key.
4
Enter a SUB address using the Keypad, and press the OK key.
% To correct a numeric value, press the Clear/Stop key.
% When entering a password, go to Step 5.
% When not entering a password, press the OK key, and go to Step 6.
5
Enter the password using the Keypad, and press the OK key.
% To correct a numeric value, press the Clear/Stop key.
6
Press OK.
Continuously, register other items.