Konica Minolta Bizhub 215 User Manual
Page 29
bizhub 215
3-3
3.1
Transmission procedure
3
6
Use +, to select [AUTO DETECTION] or [MANUAL], and press the OK key.
% If [MANUAL] is selected, specify the paper size.
7
To start scanning, press the OK key.
% When changing the scanning paper size, press , to respecify the size.
8
When continuously scanning the original, load the next original, and press the OK key.
% Repeat this procedure until scanning of originals is completed.
9
When scanning of all originals has been completed, press the Start key.
Sending starts.
After sending is completed, a "long beep" sounds.
% To stop sending, press the Clear/Stop key, and select [YES] in the displayed screen.
d
Reference
When necessary, you can cancel sending the scanned document. For details, refer to page 3-18.
If a transmission fails, a transmission result report is printed out. For details, refer to page 3-19.