Konica Minolta BIZHUB C360 - Manual (Page 73)

for Customer Engineer
Issued by BT-CSO Ver 1.01 73
1. Gather necessary information
2. Prepare Initialization
3. Perform Initialization
3-1. Input [Initialization Code] to MFP and perform Initialization.
Initialization procedure:
•MFP panel
• Perform Initialization from MFP panel .
a) Enter in Service Mode, and then press
“Stop”,”9”. The “Billing Setting” screen will
appear.
Select [License Management].
b) Select [Initialize].
c) Input Initialization Code and press [Apply].
*Please pay attention “U” and “V”, “0
(number)” and “O (alphabet)”.
“0 (number)” is not used in [Initialization
Code].