Konica Minolta BIZHUB C360 - Manual (Page 46)

for Customer Engineer
Issued by BT-CSO Ver 1.01 46
e) Select [Deactivation Code].
f) Input Deactivation Code and press [END].
* Please pay attention “U” and “V”, “0
(number)” and “O (alphabet)”.
“0 (Number)” is not used in [Deactivation
Code].
g) Press [Apply] after checking Function Code
and Deactivation Code you entered.
h) Print out displayed [Deactivation Complete
Code] or write it down, and reboot MFP.
If you set A4 (SEF) to paper tray, you can
press Start button and print the code out.
i) You can check [Deactivation Complete
Code] from the following procedure.
Service Mode> Billing Setting> License
Management> List
Deactivation procedure in MFP completed.
*If there are no activated functions, you cannot
open [Function List].