Konica Minolta BIZHUB C360 User Manual
Page 16
for Customer Engineer
Issued by BT-CSO
Ver 1.01
16
d) Select [Yes] and press [OK].
e) Press [Print List] and print displayed
[Request Code] and [Serial Number].
Or write down [Request Code] and [Serial
Number].
*Please pay attention “U” and “V”, “0
(number)” and “O (alphabet)”. “0 (Number)” is
not used in [Request Code].
e’) When selecting [Print List], please press
[Start] or Start button after selecting the paper
tray.
When printing it, [Request Code] and [Serial Number] will be printed as sample below.
f) Exit from Administrator Mode and go on to
the next step [2. Access to LMS].
This manual is related to the following products: