Konica Minolta BIZHUB C360 - Manual (Page 72)

for Customer Engineer
Issued by BT-CSO Ver 1.01 72
1. Gather necessary information
2. Prepare Initialization
2-1. Contact the Support contact.
2-2. Get [Initialization Code] from the Support contact.
3. Perform Initialization
• Contact the Support contact. (Customer engineer)
a) Contact the Support contact and inform [Serial Number] [Request Code] [Service History] to
get [Initialization Code].
1. Gather necessary information
2. Prepare Initialization
2-1. Contact the Support contact
2-2. Get [Initialization Code] from the Support contact.
3. Perform Initialization
• Get [Initialization Code]. (Customer engineer)
a) When you get [Initialization Code] from the Support contact, please go on to the next [3.
Perform Initialization].