Konica Minolta BIZHUB C360 - Manual (Page 27)

for Customer Engineer
Issued by BT-CSO Ver 1.01 27
l) Click [Generate License Code].
* If there is no need to input Request Code, the
input on the text box will be restricted.
(operation h)
In this case, it is possible to generate License
Code without inputting Request Code.
m) Click [OK].
n) Click [Print] button to print this page or write
then down.
* Please pay attention “U” and “V”, “0
(number)” and “O (alphabet)”.
“0 (Number)” is not used in [License Code].
(When you access MFP and LMS from the
same PC, you also use Copy and Paste to
enter the code.)
o) Close the window and go on to the next step
[3. MFP Activation].