Konica Minolta BIZHUB C360 - Manual (Page 26)

for Customer Engineer
Issued by BT-CSO Ver 1.01 26
h) Input [Request Code] and click [Next].
* Please pay attention “U” and “V”, “0
(number)” and “O (alphabet)”.
“0 (Number)” is not used in [Request Code].
*If there is no need to input Request Code, the
following message is displayed. “No input of
Request Code is needed. Please click the
“Next” button.”
i) Input [Token Number], select the License Kit
(Product Description) that needs activation,
and click [Add].
j) Click [OK].
k) Check [Token Number] and [Product
Description] and click [Next].
When you need correction, click [DEL] button
and start from the operation “i)” again.