Konica Minolta BIZHUB C360 User Manual
Page 40
for Customer Engineer
Issued by BT-CSO
Ver 1.01
40
Deactivation Procedure
The following is the step by step procedure to deactivate License Activate Base Functions.
1. Gather information form MFP/ Kit
1-1. Find [Token Number] from License Kit.
1-2. Find [Serial Number] from MFP.
2. Get Deactivation code
2-1. Access to LMS and get [Deactivation Code] and [Function Code]
3. MFP Deactivation
3-1. Input [Deactivation Code] and [Function Code] to MFP and deactivate functions.
3-2. Input [Deactivation Complete Code] to LMS.
When using each code, please pay attention “U” and “V”, “0(number)” and “O(alphabet)”.
“0 (Number)” is not used in [Deactivation Code] and [Deactivation Complete Code].
Here are necessary information (operation) and acquisition procedure in the above steps.
Information (operation)
Acquisition Procedure
Note
Token Number
Token Certificate (License Kit)
20 digits alphanumeric
Check License Kit that needs
Deactivation.
Serial Number
Serial Number Label
13 digits alphanumeric
Input to LMS
Deactivation Code
LMS (Web browser)
35 digits alphanumeric
Input to MFP panel
Function Code
LMS (Web browser)
Deactivation
Input to MFP panel
(Service Mode)
Deactivation Complete
Code
MFP panel (Service Mode)
35 digits alphanumeric
Input to LMS