Konica Minolta BIZHUB C360 - Manual (Page 60)

for Customer Engineer
Issued by BT-CSO Ver 1.01 60
h) Click [OK]. By pressing [Cancel], it is
possible to correct what was entered.
i) [Repair Code (Repair Permission Code)], [License
Code] and [Function Code] are displayed. Print this
page by clicking [Print] button or write down the
information.
* License code and Function Code are necessary to
re-activate the function after the repair operation.
* With some condition, the license code and the
function code may not be displayed. (Ex. When
replacing the EEPROM board.)
*Please pay attention “U” and “V”, “0 (number)” and
“O (alphabet)”. “0 (Number)” is not used in [Repair
Code (Repair Permission Code)] and [License
code].
j) Close the web browser and forward to next
step. [3. Repair the MFP]