Konica Minolta BIZHUB C360 - Manual (Page 71)

for Customer Engineer
Issued by BT-CSO Ver 1.01 71
d) Write down displayed [Request Code] and
[Serial Number], or print this page.
*Please pay attention “U” and “V”, “0 (number)”
and “O (alphabet)”. “0 (Number)” is not used in
[Request Code].
(If you access LMS using the same PC that
access to PSWC, you can input Request Code
using Copy-and-Paste.)
e) Go on to the next [2.Prepare Initialization].