Konica Minolta BIZHUB C360 - Manual (Page 7)

for Customer Engineer
Issued by BT-CSO Ver 1.01 7
— License Code
Use this code to MFP when you activate License Activation Base Functions.
License Management Server (LMS) issues this code.
— Deactivation Code
This code is issued from LMS. This code is prepared on LMS when the necessary
information is entered in LMS. After receiving the code, you need to enter it in MFP
through the control panel to perform the deactivation.
— Deactivation Complete Code
The information indicates to let LMS know the deactivation operation has been
complete properly. MFP issues this code.
— Repair Request Code (Repair Demand Code)
On the Service activates the error of license management state may be detected,
and it is displayed on the control panel. At this time, you need to issue Repair
Request to LMS. The information issued to request the Repair Code (Repair
Permission Code).
— Repair Code (Repair Permission Code)
When you enter the Repair Request Code (Repair Demand Code) to LMS,
information to solve the error of license management state is issued from LMS.
This information is Repair Code (Repair Permission Code).
— Initialization Code
In the event that the error of license management state is not resolved, the license
has to be reset to the initial condition forcibly. The information used to do it is the
initialization code and issued from LMS.
After that, it is necessary to activate the license again, to use the functions.
— Function Code (bizhub C452/C552/C652/C220/C280/C360)
Use this code to specify the function to activate or deactivate.