Konica Minolta BIZHUB C360 - Manual (Page 61)

for Customer Engineer
Issued by BT-CSO Ver 1.01 61
1. Gather information from MFP
2. Access to LMS
3. Repair the MFP (License Error)
3-1. Input Repair Code (Repair Permission Code) to solve the License Error.
Input from:
•Control Panel
• Perform Repair in .
a) Enter in Service Mode, and then press
“Stop”,”9”. The “Billing Setting” screen will
appear.
Press [License Management].
b) Press [Repair] on the left side on LCD, and
then press [Repair Code (Repair Permission
Code)].
c) Enter [Repair Code (Repair Permission
Code)] the Press [OK].
* Please pay attention “U” and “V”, “0
(number)” and “O (alphabet)”. “0 (Number)” is
not used in [Repair Code (Repair Permission
Code)].
d) Make sure the repair code, and then press
[Apply].