Konica Minolta bizhub PRESS C7000P - Manual (Page 89)

IC-601 6-51
6.4 Job Operation in the Main Body (Main Body Hold/HDD) 6
Delete Job
This section describes how to delete the job using [Delete] function from [HDD Job] list.
1
Click [Main Body Hold/HDD] tab of the Job Centro Screen.
[Main Body Hold/HDD] screen appears.
% When the user authentication/account track is set to the main body and you click [Main Body
Hold/HDD] tab, [User Auth/Account Track] screen appears. In this case, [Main Body Hold/HDD]
screen appears after authentication. For the authentication operations, refer to page 5-3.
2
From [Folder Name] list, select the folder where the job to delete is saved.
On [HDD Job], the jobs in the selected folder from the list are displayed.
% When the password is set to the folder, [Folder Password] screen appears. In this case, enter the
password, and click [OK].
3
Select the job to delete from [HDD Job] list.
The selected job is highlighted.
% You can delete the multiple jobs.
4
Click [Delete].
Confirmation screen appears.
% You can also operate by using [Delete] from the right click menu.
% You can also operate by using [Job Operations] menu - [Delete].
5
Click [OK].
The selected job is deleted.
% When you select the multiple jobs, all of those are deleted at a time.
% It might take time to reflect the deleting result when the job takes time to be deleted.
Unlock the Secure Print Job
This section describes how to unlock the secure print job in [HDD Job] list.
If you unlock the secure print job, the job will be the normal job listed in the [HDD Job] list that you can op-
erate.
0 You cannot set the password or remove the password settings using this unlock function.
1
Click [Main Body Hold/HDD] tab of the Job Centro Screen.
[Main Body Hold/HDD] screen appears.
% When the user authentication/account track is set to the main body and you click [Main Body
Hold/HDD] tab, [User Auth/Account Track] screen appears. In this case, [Main Body Hold/HDD]
screen appears after authentication. For the authentication operations, refer to page 5-3.
2
From [Folder Name] list, select the folder where the job to unlock is saved.
On [HDD Job], the jobs in the selected folder from the list are displayed.
% When the password is set to the folder, [Folder Password] screen appears. In this case, enter the
password, and click [OK].
3
In [HDD Job] list - [Password], enter the password specified on settings of the secure print job.
4
Click [HDD Job] list - [Secure Print].
The corresponding job that matches to the password becomes unlocked.
% You can also operate by using [Job Operations] menu - [Secure Print] - [HDD].
% The lock icon of the corresponding job that matches to the password is removed and the contents
of [User Name], [File Name], [Number of Sheets] and [Number of Copies] appear.
% The button name of [Secure Print] switches to [Password Off]. When you click [Password Off], the
state returns to the state before unlocked.
% When you switch the screen to other than [Main Body Hold/HDD], the state of job returns to the state
before unlocked.