Change priority, Change priority] -7 – Konica Minolta bizhub PRESS C7000P User Manual
Page 45
IC-601
6-7
6.2
Management
6
The selected job is highlighted.
3
Click [Increase Priority].
The priority of the selected job is changed to next of the job that is being processed.
% You can also operate by using [Increase Priority] from the right click menu.
% You can also operate by using [Job Operations] menu - [Increase Priority].
% You can not use [Increase Priority] when you select multiple jobs.
% When the [Status] of job is [Print Waiting], the priority of job is changed to next of the [Printing] job.
% When the [Status] of job is [Receiving] or [Rip Waiting], the priority of job is changed to next of the
"Ripping" job at first. After RIP processing and transmission, it is changed to next of the "Printing"
job.
% Depending on the timing of the operation, sometimes the priority might not be changed.
[Change Priority]
This section describes how to change the priority of the job to one upper priority using [Change Priority].
The priority of the job can be changed when [Status] of the job is [Receiving], [Rip Waiting], or [Print Waiting]
(only the job having completed the transmission to the main body).
1
Click [Active Job] tab of the Job Centro Screen.
[Active Job] screen appears.
2
Select the job to change the priority from [Active Job] list.