2 interfaces used for connection, Connection diagram – Konica Minolta bizhub PRESS C7000P User Manual
Page 15
IC-601
2-7
2.3
Operating environment
2
2.3.2
Interfaces used for connection
To connect Job Centro to the image controller, use the Ethernet via a network connection.
It supports 1000Base-T, 100Base-TX, and 10Base-T standards.
Connection diagram
The network cable is connected to the network port of the image controller
Lateral side of the image controller
1. Ethernet port (1000Base-T/100Base-TX/10Base-T)
1
This manual is related to the following products: