Operating the active job – Konica Minolta bizhub PRESS C7000P User Manual
Page 44
Operating the Active Job
You can change the priority of the active job from the menu of the [Job Centro] screen or from
the right-click menu. You can also delete the active job.
The available operations differ depending on the status of the job.
Job Status
Increase Priority Change Priority
Delete *2
Printing
Ч
Ч
○
Print Waiting
○
○
○
Sending
Ч
Ч
○
RIPing
○, *1
×
○
RIP Waiting
▲, *1
▲
○
Receiving
▲, *1
▲
○
Print Paused
Ч
Ч
○
Print Hold by Warning
Ч
Ч
○
▲:The operation is executed only before the job is stored in the RIP buffer and when there have
already been jobs waiting for being stored in the RIP buffer.
*1:The operation is not immediately executed, but executed only if the order of jobs can be
changed when the transmission of the jobs to the machine is completed (when there have
already been multiple reserved jobs waiting for being printed on the machine side).
▲, *1:The operation is executed when the conditions of ▲ and *1 are both met. First, the job
is moved to the top of the job group in RIP Waiting and Receiving, and then, after being
transmitted to the machine, moved to the top (for [Increase Priority]).
*2:The Delete command for the job that is already stored in the print queue may not be
accepted and the job may not be deleted.