Konica Minolta bizhub PRESS C7000P - Manual (Page 19)

IC-601 3-3
3.2 Installer 3
3.2.2 Settings of the image controller
The network setting of the image controller is necessary beforehand.
TCP/IP Setting
Specify the IP address in [Administrator Setting] - [Controller] - [Controller NIC Setting] - [TCP/IP Setting] of
this machine.
JSP Setting
Specify the port number in [Administrator Setting] - [Controller] - [Controller NIC Setting] - [JSP Setting] of
this machine.
- The default value is "30081". Usually, the amendment is unnecessary.
- When [JSP Setting] is [Enable] and [Authentication Setting] is [Disable], you can use Job Centro.
d
Reference
For details of the settings for the image controller, refer to "User's Guide POD Administrator's Reference" or
"User's Guide Main Body".