4 setup procedure, Setup procedure -8 – Konica Minolta bizhub PRESS C7000P User Manual
Page 16
IC-601
2-8
2.4
Setup procedure
2
2.4
Setup procedure
To use Job Centro, you must complete the setup in advance.
The setup refers to a series of procedures for connecting the image controller and the computer to the net-
work and installing Job Centro to the computer.
Perform the setup using the following procedures.
1
Connect the image controller and the computer to the network.
2
Check that the computer to be used is connected to the network.
3
Confirm the IP address and the port number of the JSP settings of the image controller.
4
Install Job Centro.
d
Reference
For details on the connectable interfaces, refer to page 2-7
For details of the image controller, refer to "User's Guide POD Administrator's Reference" or "User's Guide
Main Body".
This manual is related to the following products: