Konica Minolta bizhub PRESS C7000P - Manual (Page 63)

IC-601 6-25
6.3 Job Operation in the Image Controller (Image Controller Hold) 6
[Basic Setting] screen
Function Description
[Original Size] It displays the original size and orientation for the job.
[Use Paper Profile] You can specify whether to use the paper profile or not. It becomes
available after you click [Acquire Device Information] and acquire pa-
per profile information.
When you change the values of [Paper Size], [Feed Direction],
[Type], [Weight], [Weight Unit], [Color], and [Pre-Punched] after you
check the checkbox, the settings of checkbox is cleared.
[Paper Profile] Select the paper profile to use.
[Paper Size], [Feed Direction], [Type], [Weight], [Weight Unit], [Color],
and [Pre-Punched] are automatically changed to the setting values
for the selected paper profile.
When you change the values of those after you select the paper pro-
file, this setting is changed to [No Setting].
[Paper Tray] You can specify the paper tray to use.
[Check Tray Settings] Applies the setting values specified in [Tray Setting] screen to the
paper tray selected from [Paper Tray].
[Paper Size], [Feed Direction], [Type], [Weight], [Weight Unit], [Color],
and [Pre-Punched] are automatically changed to the setting values
of tray settings.
When you click [Check Tray Settings], [Use Paper Profile] checkbox
is cleared.
[Paper Size] You can specify the paper size.