Konica Minolta bizhub PRESS C7000P - Manual (Page 64)

IC-601 6-26
6.3 Job Operation in the Image Controller (Image Controller Hold) 6
[Custom Size Settings] To use the custom size, register the custom paper size.
You can select the registered paper size from the [Paper Size] list.
Refer to page 6-27 for more detailed information on how to register
the paper size.
• The custom size is displayed in the paper size list in [Per Page
Setting] and [Perfect Binding Settings].
[Feed Direction] You can specify the feed direction.
[Type] You can specify the paper type.
[Weight] You can specify the paper weight.
[Weight Unit] You can specify the weight unit.
[Color] You can specify the paper color.
[Pre-Punched] You can specify the punch settings.
[Full Bleed] Check this to print with no margins. This is available if the paper size
is wider than the original size at least 5 mm in width and height.
[Output Mode] You can specify the output mode (Print, Main Body Hold/Print, Main
Body Hold).
This setting is not retained even if you click [Save]. It is enabled only
when printing the job by pressing [Print] on the Print Setting screen.
[Secure Print] Check this to add the password (within 8 alphanumeric characters)
to the job when sending it to the main body if [Main Body Hold] is
selected in [Output Mode].
You need to input the password in the control panel in the main body
to print the job.
Check this to add the password (within 8 alphanumeric characters)
to the job when sending it to the hold queue in the image controller
if [Print] is selected in [Output Mode].
You can not print the secure print job if [Main Body Hold/Print] is se-
lected in [Output Mode].
This setting is not retained even if you click [Save]. It is enabled only
when printing the job by clicking [Print] on the Print Setting screen.
[Number of Copies] You can specify the number of copies.
[User Auth/Account Track] Click this to set the user authentication information if the User Au-
thentication/Account Track function is enabled in the main body.
[Specify Print Range] You can specify the print range.
This setting is not retained even if you click [Save]. It is enabled only
when printing the job by clicking [Print] on the Print Setting screen.
Preview image Displays the preview image of the settings of [Layout and Finishing],
[Finish-Fold], and [Sort/Group].
Function Description
Custom size for the
current job
Custom size list in
Job Centro