Konica Minolta bizhub PRESS C7000P - Manual (Page 26)

IC-601 5-3
5.1 Launch Job Centro 5
5.1.2 User Authentication/Account Track
The user authentication/account track is necessary to display [Main Body Hold/HDD] screen when either or
both of the user authentication and account track function are set to the main body that the image controller
connects.
1
Click [Main Body Hold/HDD] tab of the Job Centro Screen.
2
In [User Auth/Account Track] screen, select [Public User] or [Registered User].
% According to the settings of the main body, you can not occasionally select [Public User].
When you select [Public User], go to Step 4.
3
When [User Name] and [User Password] are available, enter the user name and the user password.
% Specify the user name in [User Name] within 64 one-byte alpha-numerical characters.
% Specify the user password in [User Password] within 64 one-byte alpha-numerical characters.
4
When [Account Name] and [Account Password] are available, enter the account name and the account
password.
% Specify the account name and the account password in [Account Name]/[Account Password] within
8 one-byte alpha-numerical. When there is no account name, leave it blank.
% When the user authentication synchronizes with the account track, [Account Name]/[Account Pass-
word] are set automatically with values of [User Name]/[User Password]. In this case, it is not nec-
essary to enter in [Account Name] and [Account Password].
5
Click [OK].
% When you click [Cancel], this process is canceled.
[Main Body Hold/HDD] screen appears.