Konica Minolta bizhub PRESS C7000P - Manual (Page 28)

IC-601 5-5
5.2 Screens of Job Centro 5
5.2.2 [Device Information]
Displays information of the main body after clicking [Device Information] tab.
[Device Status]
Displays the status of the main body via the image controller currently connected.
The following statuses of the main body are displayed.
Item Description
[Device Status] Displays the status of the main body.
[Consumables] Displays the status of each toner and the waste toner box.
[Paper Tray] Displays the paper information and the paper level for each
paper tray.
[Device Information] Displays the detailed information of the configuration of op-
tions installed to this main body, the toner level, etc.
Display Description
No Error Indicates that the main body has no error.
Low Power Indicates that the main body is in the low power mode.
Sleep Indicates that the main body is in the sleep mode.
Warming Up Indicates that the main body and the perfect binding option are
warming up.
Calibrating Indicates that the printer engine is calibrating.
Low Paper Indicates that the paper level of tray 4 or tray 5 is low.
No Paper Indicates that either of paper trays is empty or it is necessary to
load the paper for the current printing job.
Low Toner Indicates that the toner level of either of toner bottles is low.
Toner Empty Indicates that the toner level of either of toner bottles is empty.
Cover Open Indicates that the door of the main body opens.
Paper Jam Indicates that the paper jam occurs in the main body. Remove the
jammed paper following the instructions displayed on the control
panel.
Service Call Indicates that the service call failure occurs at the main body or the
image controller.