Konica Minolta bizhub PRESS C7000P - Manual (Page 68)

IC-601 6-30
6.3 Job Operation in the Image Controller (Image Controller Hold) 6
[Cover Sheet/Insert Sheet] screen
Function Description
[Header Page Settings] Check this to output the header page that describes the job informa-
tion. You can specify the paper tray for the header page.
[Per Page Setting] You can specifies the per page setting.
You can specify the per page setting for [Print Type], [Paper Tray],
[Paper Size], [Feed Direction], [Glossy], [Staple], [Finish Stapling],
and [Punch].
Refer to page 6-31 for more detailed information.
[PI Front Cover Tray] Set this if you want to insert the front cover from the PI tray.
[Front Cover Tray] You can specify the paper tray for the front cover.
Check [Print] to print the front cover.
Check [Glossy] to print in the glossy mode.
[Paper Profile (Front Cover)] You can select the registered paper profile.
[PI Back Cover Tray] Set this if you want to insert the back cover from the PI tray.
[Back Cover Tray] You can specify the paper tray for the back cover.
Check [Print] to print the front cover.
Check [Glossy] to print in the glossy mode.
[Paper Profile (Back Cover)] You can select the registered paper profile.
[Perfect Binding] You can specify whether to set the Perfect Binding function.
[Perfect Binding] You can specifies the perfect binding settings.
You can set Cover Print Mode, Cover Tray, Cover Size, Paper Pro-
file, Cover Duplex, Cover Trimming, Spine Width, and Glossy Mode.
Preview image Displays the preview image of the settings of [Cover] and [Perfect
Binding].