Tone curve adjustment] screen menu, Tone curve adjustment] screen menu -42 – Konica Minolta bizhub PRESS C7000P User Manual
Page 80
IC-601
6-42
6.3
Job Operation in the Image Controller (Image Controller Hold)
6
[Tone Curve Adjustment] screen menu
The following menus can be used in the [Tone Curve Adjustment] screen.
[CW]
Rotates the image 90 degrees clockwise.
[Scale Down]
Displays the image reduced.
[Scale Up]
Displays the image enlarged. Enlargement factor can be chosen
from the four steps: x2, x4, x8 and x16.
(CMYK values view area)
When the mouse cursor is placed on the image before adjustment
or the image after adjustment, the CMYK values of the cursor posi-
tion are displayed. CMYK values are displayed for before and after
the adjustments.
(Curve viewer area)
Displays the tone curve which reflects the settings in the [Bright-
ness/Contrast] tab and the [Adjust Each Color] tab. Also, the tone
curve can be adjusted by adding points on the curve or moving the
points.
(Vertical axis box)
Displays the output density(%) of the point selected at the curve
view area in percentage. Also, the selected point can be moved by
specifying a value.
(Horizontal axis box)
Displays the input density(%) of the point selected at the curve view
area in percentage. Also, the selected point can be moved by spec-
ifying a value.
[Brightness/Contrast]
Adjusts brightness and contrast. In brightness/contrast adjust-
ments, all colors of CMYK are collectively adjusted.
[Adjust Each Color]
Selects the adjustment colors (CMYK, CMY/K, C/M/Y/K). Also, the
tone curve view area and operating colors will be changed accord-
ing to the selected settings.
[Undo]
Restores all CMYK curves to the last saved status.
[Confirmation Print]
Prints the image after applying the adjustments so that the results of
adjustments can be confirmed.
[Apply]
Applies the adjusted tone curve to the job.
[Help]
Displays Help.
Status bar
Displays the IP address and port number to which Image Controller
is currently connected.
Item
Description
Menu
Menu Items
Description
[File]
[Login]
This function cannot be used when adjusting the tone curve in
Job Centro.
[New Tone Curve]
Creates a new tone curve.
[Tone Curve Man-
agement]
Displays the [Tone Curve Management] screen and selects the
tone curve to be loaded. In the [Tone Curve Management]
screen, management operations of tone curves are conducted.
[Select Sample]
This function cannot be used when adjusting the tone curve in
Job Centro.
[Confirmation
Print]
Prints the image after applying the adjustments so that the re-
sults of adjustments can be confirmed.
[Save]
Saves the results of adjustments.
[Apply]
Applies the adjusted tone curve to the job.
[Close]
Closes and exists from the screen.