Konica Minolta bizhub PRESS C7000P - Manual (Page 88)

IC-601 6-50
6.4 Job Operation in the Main Body (Main Body Hold/HDD) 6
[Output] screen appears.
% You can also operate by using [Output] from the right click menu.
% You can also operate by using [Job Operations] menu - [Output].
5
From [Output Method], select [Print].
6
Specify the number of copies to print in [Sets].
% The available number of copies is from "1" to "9999".
7
Click [OK].
The job is transmitted to the print queue of the main body and printed.
Store Job into the Hold Queue in the Main Body
This section describes how to store the job in HDD of the main body into the hold queue of the main body
using [Output] function.
1
Click [Main Body Hold/HDD] tab of the Job Centro Screen.
[Main Body Hold/HDD] screen appears.
% When the user authentication/account track is set to the main body and you click [Main Body
Hold/HDD] tab, [User Auth/Account Track] screen appears. In this case, [Main Body Hold/HDD]
screen appears after authentication. For the authentication operations, refer to page 5-3.
2
From [Folder Name] list, select the folder where the job to store.
On [HDD Job], the jobs in the selected folder from the list are displayed.
% When the password is set to the folder, [Folder Password] screen appears. In this case, enter the
password, and click [OK].
3
Select the job to store from [HDD Job] list.
The selected job is highlighted.
% You can not store when you select multiple jobs.
4
Click [Output].
[Output] screen appears.
% You can also operate by using [Output] from the right click menu.
% You can also operate by using [Job Operations] menu - [Output].
5
From [Output Method], select [Main Body Hold] and click [OK].
The job is stored into the hold queue of the main body.