Konica Minolta bizhub PRESS C7000P - Manual (Page 39)

IC-601 6-2
6.1 Job Management of the Printing System 6
6 How to Manage Job with Job Centro
6.1 Job Management of the Printing System
For proper use of Job Centro, this section describes the job management of the printing system that is com-
posed with the main body and the image controller.
The jobs of the main body are managed using the control panel and other utility. The objects of the main body
job management are the copy job, scan job and print job.
The jobs of the image controller are managed using Job Centro. The object of the image controller job man-
agement is print job.
In addition, Job Centro can manage the job of the main body because Job Centro acquires the information
of the main body from the image controller currently connected.
6.1.1 Overview of the Job Management by Job Centro
Job Centro uses the following 4 screens to manage job. Each screen can be displayed by clicking each tab
of [JOB LIST].
- [Active Job] screen
- [Image Controller Hold] screen
- [Main Body Hold/HDD] screen
- [Job History] screen
The following job information of each phase is displayed in each screen.
The job of the phase (1) mentioned above are managed in [Active Job] screen. Please note that the both of
jobs in the image controller and the main body are managed.
The job of the phase (2) mentioned above are managed in [Image Controller Hold] screen.
The job of the phase (3) mentioned above are managed in [Main Body Hold/HDD] screen.
The job of the phase (4) mentioned above are managed in [Job History] screen.
Using Job Centro, several operations can be done in the corresponding screens as follows; change of the
job priority, output (reprint) of job, saving of job, copy of job (from one hold queue to other hold queues in the
image controller), output of the secure print job and job deleting.
Image Controller Main Body
JOB
(3) (4) (1) (1) (2)
Hold/
HDD
Hold
Rippping Printing Output
Rip
Waiting