Goulds Pumps 3600 - IOM - Manual (Page 62)

Maintenance
5. Remove the dowel pins (469J) that hold the lower half of the bearing housing to the casing
flange.
6. Loosen and remove the nuts (427J) that hold the bearing housing in place.
7. Rotate the lower half of the sleeve bearing (117) around the shaft (122) in order to remove
the bearing from the lower housing.
8. Remove the lower half of the bearing housing.
9. Remove the outboard labyrinth seal (332A), the two oil rings (323), and the inboard
labyrinth seal (333A).
60 Model 3600, API 610 8th, 9th, 10th & 11th Editions (ISO 13709) Installation, Operation, and Maintenance Manual