Disassemble the thrust end (ball bearing pumps) – Goulds Pumps 3600 - IOM User Manual

Page 59

Maintenance

8. Use a bearing puller in order to remove the radial bearing (168) from the shaft.

9. Remove the inboard bearing cover (160), the inboard labyrinth seal (333A), and the inner

bearing cover bolts (371C).

10. Remove the seal plate nuts (355) and the mechanical seal (250).

Refer to the instructions provided by the mechanical seal manufacturer.

11. (Optional) Remove the cooling plate bolts (388K and 388G), the cooling plate (490), and

the cooling plate gaskets (360U and 360S not shown).
Removal of the cooling plate is not required in order to remove the head from the case.

Disassemble the thrust end (ball bearing pumps)

1. Unbolt the cover bolts (371C) and remove the outboard thrust bearing end cover (109A).

Loosen the inboard end cover (160) and cover bolts (371C).

Model 3600, API 610 8th, 9th, 10th & 11th Editions (ISO 13709) Installation, Operation, and Maintenance Manual