Camera operation, 1 main camera switch, 2 running and stopping the camera – ARRI ARRIFLEX 416 User Manual

Page 55: Camera operation, Cameraoperation

.CameraOperation

9.1 Main Camera Switch

• If using a mains unit, switch it on.

• Connect the camera to the mains unit or battery.

• Push the “ON/OFF” button

photo

to turn the

camera on. Push the “ON/OFF” button for approx. 3

seconds to turn the camera off again.

Note:

If the camera power supply is interrupted, the

camera remembers whether it was on or off

before the interruption and returns to that state

when power is restored. This is useful if the

camera is rigged in a situation where access is

difficult as the battery can be changed without

having to press the “ON/OFF“ button.

Camera

Operation

RUN button

9.2 Running and Stopping the

Camera

A “RUN” button is located on both sides of the camera

photo