ARRI ARRIFLEX 416 - Manual (Page 43)

.CameraBody
7.1 Mechanically Adjustable
Mirror Shutter
The mirror shutter on the ARRIFLEX 416 can be mechanically
adjusted while the camera is switched off. The shutter angle
can be adjusted from 180° to 45°. The shutter locks in the
following positions: 180°, 172.8°, 150°, 144°, 135°, 90°
and 45°.
Setting the Mirror Shutter Angle
• Switch off the camera and disconnect the camera from
the power supply!
• Remove the lens or the protective cap from the lens
mount receptacle.
Do not touch the reflective surface of the mirror.
• Prevent the shutter from rotating by inserting the flat tip
of the red plastic film track cleaning rod from the
camera’s tool kit into the slot at the mirror shutter
centre a photo .
• Insert the shutter tool carefully into the adjustment
recess a photo .
Camera
Body
mirror shutter tool film track cleaning tool