ARRI ARRIFLEX 416 - Manual (Page 119)

11 11
Color Bars ON/OFF
Color bars can be displayed instead of the video image.
The bars are helpful to set up or check monitors, which
are connected to the IVS.
Note: If the IVS is switched off and on again, it will
always start in the mode COLOR BARS OFF to
avoid accidental use of this mode.
• Move the cursor > with the keys Ê and Ë to the line
– COLOR BARS. Pressing the Í or Ì key will switch
the color bars on and off.
Exit
Use exit to return to the main menu.
• Move the cursor > with the keys Ê and Ë to the line
– EXIT and press the key Í or Ì.
Note: Pressing the Enter/Insert key Ñ for more than
three seconds will cause the system to exit the
on-screen programming mode completely,
regardless of which menu is activated, with the
exception of the positioning mode.
Video-A
ss
is
t-Sy
stem
MENU WB/GAIN/BARS
- WHITE BALANCE MAN
- AUTOADJUST
- RED 30
- BLUE 39
- MANUAL GAIN OFF
VALUE
-> - COLOR BARS OFF
- EXIT
MENU WB/GAIN/BARS
- WHITE BALANCE MAN
- AUTOADJUST
- RED 30
- BLUE 39
- MANUAL GAIN OFF
VALUE
- COLOR BARS OFF
-> - EXIT