ARRI ARRIFLEX 416 - Manual (Page 201)

01
ARRIFLEX
1
Plu
s
12.5 Lens Data Display
Compatibility
The ARRIFLEX 416 Plus can be used with the Lens Data
Display for Focus Puller (LDD-FP) to display lens information
using the Lens Data Archive. LDS contacts are not fitted to
the camera‘s lens port so LDS lenses and the LDS Data Mount
are not supported.
The ARRIFLEX 416 Plus is only compatible with
the Lens Data Display for Focus Puller (LDD-FP).
The Lens Data Display Classic (LDD) is not
supported.
The LDD-FP can be operated with the 416 Plus in either of
the following configurations:
• Cable LDDFP-RDO (K2.54172.0) between the LDD
connector on the camera and the LDD-FP for cable
operation.
Or
• Wireless, mounted on the WMU-3.
Lens Data Archive
The Lens Data Archive provides the key LDS features for
any camera with any lens, as long as the LDD-FP, UMC-3
or 416 Plus and CLM-1 or CLM-2 lens motors are used –
manual follow focus is not supported. After each lens change,
the lens type is selected from a pre-programmed menu on
the LDD-FP.