Mounting the obb-2, Removing the obb-2, Power supply – ARRI ARRIFLEX 416 User Manual
Page 31

1
1
The OBB-2 contains Lithium-Ion cells. The
equivalent Lithium content is less than 8 grams.
Tested according to UN manual of test and
criteria chapter 38.3.
To reduce the risk of fire burns do not
disassemble, crush, puncture or short external
contacts.
Do not dispose of in fire or water.
Do not expose to temperatures above 60°C.
Use specified charger only.
Charge: 0°C to 40°C.
Discharge: -20° to +50°C.
Remove from camera when discharged, during
transport and in storage.
Check the current regulations regarding trans-
portation of Lithium-Ion batteries with your carrier.
Mounting the OBB-2
• Fit the power plug of the OBB-2 into the camera power
connector and slide the battery forward
a
photo
.
Removing the OBB-2
• Hold the OBB-2 and press the on-board battery
release button
a
photo
.
• Pull the battery backwards until the power connectors
disengage.
OBB-2
release button
Power
Supply