Timecode – ARRI ARRIFLEX 416 User Manual
Page 178
1
Overview of the Display Indications
used in Timecode Operation
TC-Indication on the Display
The “TC“ symbol has the following meanings:
Timecode symbol (TC) solid
Timecode is set and will be recorded
when the camera is running
No timecode symbol (TC)
Timecode recording is turned off
Timecode symbol (TC)
Any TC Warning (see next section)
blinks in Standby
(e.g. Timecode was last set or
external synchronization was last performed
over 8 hours ago)
Note:
If the last setting or synchronization
was over 8 hours ago timecode can
still be recorded for test purposes
Timecode symbol (TC) blinks
Timecode is not being recorded on the film
while the camera is running
because of a functional disturbance
Timecode