ARRI ARRIFLEX 416 - Manual (Page 49)

Optic
s
.Optics
8.1 Lenses
All ARRIFLEX lenses with a PL-mount can be used. Lenses
with a Ø 41 mm standard or bayonet mount can be used
with a suitable adapter. Heavy and long lenses, such as
zoom lenses, must be supported at all times.
Attaching Lenses
• Remove the protective cap from the lens mount receptacle
by turning the lens lock ring a photo counter-clockwise
(as viewed from in front of the camera) as far as it will
go and then pulling out the protective cap.
Never put your fingers into the lens mount
receptacle.
• Push the lens into the lens mount receptacle without
catching it at the edges. One of the four slots on the
lens mount must fit over the index pin a photo .
• Press the lens flat onto the lens mount receptacle and
turn the lens lock ring clockwise to tighten.
Note: The camera is permanently set in Super 16
configuration.
index pin
lens ring