HID Asure ID 7.5 User Guide - Manual (Page 7)

July 2014 Page 7 of 44
Asure ID PLT-01485 Rev 2.0
Step Procedure
5 When installation is complete, Asure ID allows you to perform the following installation options:
1. Activate Asure ID – If you have a license key available you can activate the Asure ID
software upon installation. If you don’t then Asure ID will be installed in trial mode
and will remain active for 30 days.
2. Select Alternate Native Data Source – Select this if you would like to configure the
native data source which stores card templates and Asure ID system information. By
default Asure ID will set the native source to an embedded MS Access data source.
Helpful Hint: We recommend configuring this for installations where Asure ID will be
used on multiple PC’s and all template and reporting information needs to be
consistent.
3. Enable Asure ID to Automatically Check for Updates – This allows the Asure ID
software to notify you of product updates that can be applied
Click Finish to run the selected installation options.