HID Asure ID 7.5 User Guide - Manual (Page 23)

July 2014 Page 23 of 44
Asure ID PLT-01485 Rev 2.0
Step Procedure
19 Within the application configuration tab, double-click the text underneath Card ID Number that states
No Linkage Defined to link the Card ID Number to the external data source.
20 Click Create New Data. Refer back to step 8 for how to properly link the data field within the external
data source.
21 Duplicate this process link the Facility Code to an external data source.
Helpful Hint: If you do not need to use the Facility Code, you can simply create a new data field that
is not linked to the external data source. Asure ID stores this information in the native data source.
22 When both data fields are linked to the data source, click OK to complete the process for Inline Smart
Card Personalization with iDIRECTOR.
(Note: If the either the Facility Code or Card ID Number are not linked to any data fields Asure ID
cannot complete the in-line personalization process at the time of issuance.)
23 For information on how to issue cards with Asure ID using the Data Entry module, proceed to Data
Entry.