HID Asure ID 7.5 User Guide - Manual (Page 22)

Page 22 of 44 July 2014
Asure ID PLT-01485 Rev 2.0
Step Procedure
15 Manually select the card type, if you know it. Otherwise, use the Auto Detect feature to automatically
detect the card type.
16 With the card type selected click the Add Application link to open the iDIRECTOR Wizard, which will
walk you through the process of reading/writing information from the card. In this example, we read
the HID Access Control Application information.
17 To read the HID Access Control Application information, iDIRECTOR must know what format the
information is stored in. Select the format manually, if you know it, or click Auto Detect. Click Next to
continue.
18 To read HID Access Control Application information and write it to an external data source, deselect
the Create a Data Field for each iDIRECTOR Field checkbox.
Helpful Hint: If you do not remove the check from the checkbox, Asure ID creates a data field for the
Facility Code and Card ID Number to be stored within the Asure ID native source.