AMX NI-2100/3100/4100 User Manual
Ni series
This manual is related to the following products:
Table of contents
Document Outline
- NI Series - WebConsole & Programming Guide
- Overview
- Initial Configuration and Firmware Upgrade
- Before You Start
- Using the ID Button to Change the Master Device Value
- Obtaining the NI Controller’s IP Address (using DHCP)
- Assigning a Static IP to the NI Controller
- Communicating Via an IP
- Verifying the Firmware Version On the Master
- Upgrading the On-board Master Firmware via an IP
- Upgrading the NI Controller Firmware Via IP
- Upgrading NXC Card Firmware Via IP
- Resetting the Factory Default System and Device Values
- Onboard WebConsole User Interface
- WebConsole - WebControl Options
- WebConsole - Security Options
- WebConsole - System Options
- System Overview
- System - Manage System
- Manage System - System Number
- Manage System - Control/Emulate Options
- Manage System - Diagnostics Options
- Manage System - Server Options
- Port Settings
- Server Port Settings
- SSL Certificate Options
- Creating an SSL Server Certificate
- SSL Certificate Entries
- Displaying SSL Server Certificate Information
- Creating a Request for an SSL Certificate
- Self-Generating an SSL Certificate
- Regenerating an SSL Server Certificate Request
- Exporting an SSL Certificate Request
- Importing an SSL Certificate
- Manage System - Clock Manager Options
- System - Manage License
- System - Manage NetLinx
- System - Manage Devices
- Manage Devices - Device Options
- Manage Devices - Bindings
- Manage Devices - User-Defined Devices
- Manage Devices - View All Active Devices
- Manage Devices - Manage Polled Ports
- Programming
- Terminal (Program Port/Telnet) Commands
- Appendix A: IPSec Configuration File
- Appendix B: Clock Manager NetLinx Programming API